Home  |   Contact  |   Top Rated  |   Add Your Link  |   Links  

Could you use an extra $300 to $1,000 a month?

Join the NPD Online Research Team and you will have a chance to WIN CASH! - starting with the chance to win $1,000 just for registering to join!

 hinge

 cabinet hinge

 door hinge

 blum hinge

 gate hinge

 piano hinge

 industrial hinge

 spring hinge

 kitchen cabinet hinge

Hinges : Featured

• Von Morris Cabinet Hardware 1.5" X 1.5" Cabinet Hinge - Solid Extrude Brass - Loos  ^new
  

  PRICE: 13.80

  Von Morris Cabinet Hardware Von Morris Cabinet Hinge - Solid Extrude Brass - Loose Pin Cabinet Hinge - Solid Extrude Brass - Loose Pin Length of Joint :1.5" Width Open : 1.5" Gauge of Metal : 0.093" Screw Size : 6 x 0.75" Screw Quan. Per Hinge: 8 All hinges are packed with solid brass type "A" tapping flathead screws of the appropriate size. Brass Cabinet Hinges are supplied with threaded Decorative Ball Finials. Other finials are available at additional cost. All finials are threaded into the barrel of the hinge to prevent the pin from rising. All finials are sized to match the diameter of the hinge barrels to which they are mounted. Sold as Pairs FEATURES OF: SOLID EXTRUDE BRASS - LOOSE PIN - CABINET HINGE HINGE BODY:Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances. The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed. FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List. PINS: Pins are machined from 304 series Stainless Steel for high durability and resistance to rust. One end is rounded to facilitate re-assembly, while the other end is knurled to keep the pin from dropping through the hinge barrel during re-assembly. The pin is held in place by the threaded finials and can be easily removed by unthreading the finials and tapping the pin up from the bottom. FASTENERS:All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either four per bag or six per bag to facilitate sales of half pairs. FINIALS: Cabinet hinges come with threaded ball finials installed. Other finials are available, packed in sets of four. ATTENTION: Custom Finishes Take 12 WEEKS To Deliver TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE SEE RELATED ITEMS FOR HINGE FINIAL SELECTION
  (Added: 2006 Hits: 0 Rating: 0.00 Votes: 0)   Rate It   Review It
  

• Von Morris Cabinet Hardware 2.0" X 1.5" Cabinet Hinge - Solid Brass - Olive Knuckl  ^new
  

  PRICE: 30.00

  Von Morris Cabinet Hardware Von Morris Cabinet Olive Knuckle Hinge Solid Brass - Olive Knuckle -Cabinet Hinge Length of Joint :2.0" Width Open : 1.5" Gauge of Metal : 0.0935" Screw Size : 6 x 0.75" Screw Quan. Per Hinge: 6 Knuckle Size : 1.12"H x 0.39"D Olive Knuckle Hinges are Priced and Sold as Eaches Hinges Number 19-2015 and 19-2520 are equipped with one brass bushing each. Hinge 19-3025 is equipped with one precision machined ball bearing assembly Ball bearings are machined from 300 series Stainless Steel and employ Stainless Steel balls. All pins are precision machined from 300 series Stainless Steel. All olive knuckle hinges are handed. Be sure to specify hand of hinge when ordering. SEE PRODUCT SPECIFICATIONS FOR HANDING DIAGRAM FEATURES OF: SOLID EXTRUDE BRASS - OLIVE KNUCKLE - CABINET HINGE HINGE BODY: Hinge body is manufactured of solid forged brass. BALL BEARINGS: Each hinge is equipped with one precision machined anti-friction ball bearing assembly. The two races are machined from 300 series Stainless Steel. The balls are Stainless Steel as well. The bearing shell is machined from brass of the same alloy as the hinge body to ensure an accurate color match. The construction results in an extremely durable, long life ball bearing which is able to withstand years of hard use and corrosive environments. This bearing greatly increases both the lateral and vertical load bearing capability of the hinge and therefore increases hinge life. FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List. PINS: Pins are machined from 300 Stainless Steel for high durability and resistance to rust. They are permanently installed in one half of the hinge. The other end is rounded to facilitate re-assembly. FASTENERS: All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged 6 per bag to facilitate sales of half pairs. ATTENTION: Custom Finishes Take 12 WEEKS To Deliver TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE SEE RELATED ITEMS FOR HINGE PIN COVER SELECTION
  (Added: 2006 Hits: 0 Rating: 0.00 Votes: 0)   Rate It   Review It
  

• Von Morris Cabinet Hardware 2.0" X 1.5" Cabinet Hinge - Solid Extrude Brass - Loos  ^new
  

  PRICE: 14.66

  Von Morris Cabinet Hardware Von Morris Cabinet Hinge - Solid Extrude Brass - Loose Pin Cabinet Hinge - Solid Extrude Brass - Loose Pin Length of Joint :2.0" Width Open : 1.5" Gauge of Metal : 0.093" Screw Size : 6 x 0.75" Screw Quan. Per Hinge: 12 All hinges are packed with solid brass type "A" tapping flathead screws of the appropriate size. Brass Cabinet Hinges are supplied with threaded Decorative Ball Finials. Other finials are available at additional cost. All finials are threaded into the barrel of the hinge to prevent the pin from rising. All finials are sized to match the diameter of the hinge barrels to which they are mounted. Sold as Pairs FEATURES OF: SOLID EXTRUDE BRASS - LOOSE PIN - CABINET HINGE HINGE BODY:Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances. The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed. FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List. PINS: Pins are machined from 304 series Stainless Steel for high durability and resistance to rust. One end is rounded to facilitate re-assembly, while the other end is knurled to keep the pin from dropping through the hinge barrel during re-assembly. The pin is held in place by the threaded finials and can be easily removed by unthreading the finials and tapping the pin up from the bottom. FASTENERS:All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either four per bag or six per bag to facilitate sales of half pairs. FINIALS: Cabinet hinges come with threaded ball finials installed. Other finials are available, packed in sets of four. ATTENTION: Custom Finishes Take 12 WEEKS To Deliver TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE SEE RELATED ITEMS FOR HINGE FINIAL SELECTION
  (Added: 2006 Hits: 0 Rating: 0.00 Votes: 0)   Rate It   Review It
  

• Von Morris Cabinet Hardware 2.5" X 1.7" Cabinet Hinge - Solid Extrude Brass - Loos  ^new
  

  PRICE: 15.38

  Von Morris Cabinet Hardware Von Morris Cabinet Hinge - Solid Extrude Brass - Loose Pin Cabinet Hinge - Solid Extrude Brass - Loose Pin Length of Joint :2.5" Width Open : 1.7" Gauge of Metal : 0.093" Screw Size : 6 x 0.75" Screw Quan. Per Hinge: 12 All hinges are packed with solid brass type "A" tapping flathead screws of the appropriate size. Brass Cabinet Hinges are supplied with threaded Decorative Ball Finials. Other finials are available at additional cost. All finials are threaded into the barrel of the hinge to prevent the pin from rising. All finials are sized to match the diameter of the hinge barrels to which they are mounted. Sold as Pairs FEATURES OF: SOLID EXTRUDE BRASS - LOOSE PIN - CABINET HINGE HINGE BODY:Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances. The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed. FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List. PINS: Pins are machined from 304 series Stainless Steel for high durability and resistance to rust. One end is rounded to facilitate re-assembly, while the other end is knurled to keep the pin from dropping through the hinge barrel during re-assembly. The pin is held in place by the threaded finials and can be easily removed by unthreading the finials and tapping the pin up from the bottom. FASTENERS:All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either four per bag or six per bag to facilitate sales of half pairs. FINIALS: Cabinet hinges come with threaded ball finials installed. Other finials are available, packed in sets of four. ATTENTION: Custom Finishes Take 12 WEEKS To Deliver TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE SEE RELATED ITEMS FOR HINGE FINIAL SELECTION
  (Added: 2006 Hits: 0 Rating: 0.00 Votes: 0)   Rate It   Review It
  

• Von Morris Cabinet Hardware 2.5" X 2.0" Cabinet Hinge - Solid Brass - Olive Knuckl  ^new
  

  PRICE: 37.50

  Von Morris Cabinet Hardware Von Morris Cabinet Olive Knuckle Hinge Solid Brass - Olive Knuckle -Cabinet Hinge Length of Joint :2.5" Width Open : 2.0" Gauge of Metal : 0.0935" Screw Size : 14 x 0.75" Screw Quan. Per Hinge: 6 Knuckle Size : 1.49"H x 0.50"D Olive Knuckle Hinges are Priced and Sold as Eaches Hinges Number 19-2015 and 19-2520 are equipped with one brass bushing each. Hinge 19-3025 is equipped with one precision machined ball bearing assembly Ball bearings are machined from 300 series Stainless Steel and employ Stainless Steel balls. All pins are precision machined from 300 series Stainless Steel. All olive knuckle hinges are handed. Be sure to specify hand of hinge when ordering. SEE PRODUCT SPECIFICATIONS FOR HANDING DIAGRAM FEATURES OF: SOLID EXTRUDE BRASS - OLIVE KNUCKLE - CABINET HINGE HINGE BODY: Hinge body is manufactured of solid forged brass. BALL BEARINGS: Each hinge is equipped with one precision machined anti-friction ball bearing assembly. The two races are machined from 300 series Stainless Steel. The balls are Stainless Steel as well. The bearing shell is machined from brass of the same alloy as the hinge body to ensure an accurate color match. The construction results in an extremely durable, long life ball bearing which is able to withstand years of hard use and corrosive environments. This bearing greatly increases both the lateral and vertical load bearing capability of the hinge and therefore increases hinge life. FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List. PINS: Pins are machined from 300 Stainless Steel for high durability and resistance to rust. They are permanently installed in one half of the hinge. The other end is rounded to facilitate re-assembly. FASTENERS: All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged 6 per bag to facilitate sales of half pairs. ATTENTION: Custom Finishes Take 12 WEEKS To Deliver TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE SEE RELATED ITEMS FOR HINGE PIN COVER SELECTION
  (Added: 2006 Hits: 0 Rating: 0.00 Votes: 0)   Rate It   Review It
  

• Von Morris Cabinet Hardware 2.5" X 2.0" Cabinet Hinge - Solid Extrude Brass - Loos  ^new
  

  PRICE: 18.19

  Von Morris Cabinet Hardware Von Morris Cabinet Hinge - Solid Extrude Brass - Loose Pin Cabinet Hinge - Solid Extrude Brass - Loose Pin Length of Joint :2.5" Width Open : 2.0" Gauge of Metal : 0.093" Screw Size : 6 x 0.75" Screw Quan. Per Hinge: 12 All hinges are packed with solid brass type "A" tapping flathead screws of the appropriate size. Brass Cabinet Hinges are supplied with threaded Decorative Ball Finials. Other finials are available at additional cost. All finials are threaded into the barrel of the hinge to prevent the pin from rising. All finials are sized to match the diameter of the hinge barrels to which they are mounted. Sold as Pairs FEATURES OF: SOLID EXTRUDE BRASS - LOOSE PIN - CABINET HINGE HINGE BODY:Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances. The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed. FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List. PINS: Pins are machined from 304 series Stainless Steel for high durability and resistance to rust. One end is rounded to facilitate re-assembly, while the other end is knurled to keep the pin from dropping through the hinge barrel during re-assembly. The pin is held in place by the threaded finials and can be easily removed by unthreading the finials and tapping the pin up from the bottom. FASTENERS:All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either four per bag or six per bag to facilitate sales of half pairs. FINIALS: Cabinet hinges come with threaded ball finials installed. Other finials are available, packed in sets of four. ATTENTION: Custom Finishes Take 12 WEEKS To Deliver TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE SEE RELATED ITEMS FOR HINGE FINIAL SELECTION
  (Added: 2006 Hits: 0 Rating: 0.00 Votes: 0)   Rate It   Review It
  

• Von Morris Cabinet Hardware 2.5" X 2.5" Cabinet Hinge - Solid Extrude Brass - Loos  ^new
  

  PRICE: 19.05

  Von Morris Cabinet Hardware Von Morris Cabinet Hinge - Solid Extrude Brass - Loose Pin Cabinet Hinge - Solid Extrude Brass - Loose Pin Length of Joint :2.5" Width Open : 2.5" Gauge of Metal : 0.093" Screw Size : 8 x 0.75" Screw Quan. Per Hinge: 12 All hinges are packed with solid brass type "A" tapping flathead screws of the appropriate size. Brass Cabinet Hinges are supplied with threaded Decorative Ball Finials. Other finials are available at additional cost. All finials are threaded into the barrel of the hinge to prevent the pin from rising. All finials are sized to match the diameter of the hinge barrels to which they are mounted. Sold as Pairs FEATURES OF: SOLID EXTRUDE BRASS - LOOSE PIN - CABINET HINGE HINGE BODY:Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances. The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed. FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List. PINS: Pins are machined from 304 series Stainless Steel for high durability and resistance to rust. One end is rounded to facilitate re-assembly, while the other end is knurled to keep the pin from dropping through the hinge barrel during re-assembly. The pin is held in place by the threaded finials and can be easily removed by unthreading the finials and tapping the pin up from the bottom. FASTENERS:All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either four per bag or six per bag to facilitate sales of half pairs. FINIALS: Cabinet hinges come with threaded ball finials installed. Other finials are available, packed in sets of four. ATTENTION: Custom Finishes Take 12 WEEKS To Deliver TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE SEE RELATED ITEMS FOR HINGE FINIAL SELECTION
  (Added: 2006 Hits: 0 Rating: 0.00 Votes: 0)   Rate It   Review It
  

• Von Morris Cabinet Hardware 3.0" X 2.0" Cabinet Hinge - Solid Extrude Brass - Loos  ^new
  

  PRICE: 19.05

  Von Morris Cabinet Hardware Von Morris Cabinet Hinge - Solid Extrude Brass - Loose Pin Cabinet Hinge - Solid Extrude Brass - Loose Pin Length of Joint :3.0" Width Open : 2.0" Gauge of Metal : 0.125" Screw Size : 8 x 0.75" Screw Quan. Per Hinge: 12 USE FINIALS 60-FF-L OR 60-UF-L. ALL OTHERS USE EITHER 60-FF OR 60-UF. All hinges are packed with solid brass type "A" tapping flathead screws of the appropriate size. Brass Cabinet Hinges are supplied with threaded Decorative Ball Finials. Other finials are available at additional cost. All finials are threaded into the barrel of the hinge to prevent the pin from rising. All finials are sized to match the diameter of the hinge barrels to which they are mounted. Sold as Pairs FEATURES OF: SOLID EXTRUDE BRASS - LOOSE PIN - CABINET HINGE HINGE BODY:Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances. The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed. FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List. PINS: Pins are machined from 304 series Stainless Steel for high durability and resistance to rust. One end is rounded to facilitate re-assembly, while the other end is knurled to keep the pin from dropping through the hinge barrel during re-assembly. The pin is held in place by the threaded finials and can be easily removed by unthreading the finials and tapping the pin up from the bottom. FASTENERS:All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either four per bag or six per bag to facilitate sales of half pairs. FINIALS: Cabinet hinges come with threaded ball finials installed. Other finials are available, packed in sets of four. ATTENTION: Custom Finishes Take 12 WEEKS To Deliver TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE SEE RELATED ITEMS FOR HINGE FINIAL SELECTION
  (Added: 2006 Hits: 0 Rating: 0.00 Votes: 0)   Rate It   Review It
  

• Von Morris Cabinet Hardware 3.0" X 2.5" Cabinet Hinge - Solid Brass - Olive Knuckl  ^new
  

  PRICE: 60.00

  Von Morris Cabinet Hardware Von Morris Cabinet Olive Knuckle Hinge Solid Brass - Olive Knuckle -Cabinet Hinge Length of Joint :3.0" Width Open : 2.5" Gauge of Metal : 0.0935" Screw Size : 14 x 1.00" Screw Quan. Per Hinge: 6 Knuckle Size : 1.62"H x 0.50"D Olive Knuckle Hinges are Priced and Sold as Eaches Hinges Number 19-2015 and 19-2520 are equipped with one brass bushing each. Hinge 19-3025 is equipped with one precision machined ball bearing assembly Ball bearings are machined from 300 series Stainless Steel and employ Stainless Steel balls. All pins are precision machined from 300 series Stainless Steel. All olive knuckle hinges are handed. Be sure to specify hand of hinge when ordering. SEE PRODUCT SPECIFICATIONS FOR HANDING DIAGRAM FEATURES OF: SOLID EXTRUDE BRASS - OLIVE KNUCKLE - CABINET HINGE HINGE BODY: Hinge body is manufactured of solid forged brass. BALL BEARINGS: Each hinge is equipped with one precision machined anti-friction ball bearing assembly. The two races are machined from 300 series Stainless Steel. The balls are Stainless Steel as well. The bearing shell is machined from brass of the same alloy as the hinge body to ensure an accurate color match. The construction results in an extremely durable, long life ball bearing which is able to withstand years of hard use and corrosive environments. This bearing greatly increases both the lateral and vertical load bearing capability of the hinge and therefore increases hinge life. FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List. PINS: Pins are machined from 300 Stainless Steel for high durability and resistance to rust. They are permanently installed in one half of the hinge. The other end is rounded to facilitate re-assembly. FASTENERS: All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged 6 per bag to facilitate sales of half pairs. ATTENTION: Custom Finishes Take 12 WEEKS To Deliver TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE SEE RELATED ITEMS FOR HINGE PIN COVER SELECTION
  (Added: 2006 Hits: 0 Rating: 0.00 Votes: 0)   Rate It   Review It
  

• Von Morris Cabinet Hardware 3.5" X 2.5" Cabinet Hinge - Solid Extrude Brass - Loos  ^new
  

  PRICE: 19.05

  Von Morris Cabinet Hardware Von Morris Cabinet Hinge - Solid Extrude Brass - Loose Pin Cabinet Hinge - Solid Extrude Brass - Loose Pin Length of Joint :3.5" Width Open : 2.5" Gauge of Metal : 0.093" Screw Size : 8 x 0.75" Screw Quan. Per Hinge: 12 All hinges are packed with solid brass type "A" tapping flathead screws of the appropriate size. Brass Cabinet Hinges are supplied with threaded Decorative Ball Finials. Other finials are available at additional cost. All finials are threaded into the barrel of the hinge to prevent the pin from rising. All finials are sized to match the diameter of the hinge barrels to which they are mounted. Sold as Pairs FEATURES OF: SOLID EXTRUDE BRASS - LOOSE PIN - CABINET HINGE HINGE BODY:Hinge body is manufactured from CDA alloy 38500 brass. It is machined from an extruded bar, resulting in a hinge with high strength and precision tolerances. The hinges are beveled at the barrel to provide a close fit when the hinge is both open and closed. FINISH: Hinges are individually hand polished assuring an even finish with no unpolished areas on the barrel. The lacquer is baked on catalyzed epoxy. Von Morris extruded hinges are supplied standard as clear coated, bright brass (605). Other finishes are available for an additional charge. Please refer to the Price List. PINS: Pins are machined from 304 series Stainless Steel for high durability and resistance to rust. One end is rounded to facilitate re-assembly, while the other end is knurled to keep the pin from dropping through the hinge barrel during re-assembly. The pin is held in place by the threaded finials and can be easily removed by unthreading the finials and tapping the pin up from the bottom. FASTENERS:All hinges are provided with type "A" tapping screws. These are solid brass, flat head, counter sunk, undercut phillips head screws. All screws are lacquered to prevent tarnishing. Screws are bagged either four per bag or six per bag to facilitate sales of half pairs. FINIALS: Cabinet hinges come with threaded ball finials installed. Other finials are available, packed in sets of four. ATTENTION: Custom Finishes Take 12 WEEKS To Deliver TO VIEW FINISHES, SEE COLORS AND FINISHES ABOVE SEE RELATED ITEMS FOR HINGE FINIAL SELECTION
  (Added: 2006 Hits: 0 Rating: 0.00 Votes: 0)   Rate It   Review It
  

Latest Blogs

… and say “Ah”
Fast forward to three and a half years ago. I was driving down a freeway and a woman in a car ahead of me missed her off-ramp and decided to back up. Losing control, she “S”ed backwards crossing three lanes of traffic, then crossing them again, to T-bone me right at my driver’s door and total my minivan before she bounced off me and into ...published · 1 blogs link here.

smilers ja klaasike veini
No näed siis, jälle ma siin. Selles eelmises blogis \(mille salasõnad ma unustanud olen\) ... mulle sada komplimenti varuks, küll üks naeratab ilusti \(ahhhhh!\), küll ühe hinges on kogu see ...published · No blogs link here.

Ford Trucks GM adapts pickups to heavy duty...
GM adapts pickups to heavy-duty haulers The Myrtle Beach Sun News - Oct 01 12:13 AM Believe it or not, ... of drivers who need a really, really big pickup.Save to My Web America’s auto industry hinges ...published · 4 blogs link here.

Log El Abismo, MX Meeting the Shaman 11...
Log - El Abismo, MX - Meeting the Shaman - 11 Aug 2006Oct 1, '06 3:50 PM for everyone MisterOrthanc: Roland gives Nate very simple directions, leading them through the town in Gavin's car while Paulie chatters away to Megan in the back, whether she's listening or not ...published · No blogs link here.

Every corner a postcard
I finally worked out the smell that was coming from my hotel room - ammonia! The staff here use ammonia to clean everything ... of this old city is dominated by stores and shops selling handmade pots, vegetables, door hinges and the like ...published · 1 blogs link here.

 Parachutes